ePMP Force 300-25
System Solutions
ePMP Force 300-25
Cambium Networks is one of Friendly LLC suppliers, who offers solution that operates in high interference environments. Combining of 802.11AC Wave 2 technology and proven TDD MAC from ePMP, Force 300 CSM offers general solution, that provides possibilities of wide-range deployment models, including dish antennas with high gain rate and narrow-beam antennas for “point-to-point” solution and, in combination with ePMP3000 – for “point-multipoint” solutions.
ePMP 300-25 has integrated antenna with 25 dBi gain, narrow beam and mechanical characteristics of high performance. It supports high throughput of max. 600 Mbps, ePMP 300-25 supports always-on spectrum analysis.
Main characteristics
Operation in high interference environments and provides throughput of >500 Мб/c
Supports channel configurations: width from 20 to 80 MHz and 256 QAM
Integrated always-on spectrum analyzer. Supports constant monitoring of radio spectrum
Configurable operation modes provide fast adoptation to symmetrical and unsymmetrical trafic, providing thus high performance and latency of max. 3-5 ms
QoS management offers an outstanding quality for triple play services – VoIP, video, and data – and provides three levels of traffic priority
Long deployment range is enabled by a high gain antenna combined with 27dBm of transmit power
Operation charateristics
Channel Spacing
Configurable in 5 MHz increments
Frequency Range
Wide Band Operation 4910 - 5970 MHz
Channel Width
20 | 40 | 80 MHz
Proprietary Physical Layer
2x2 MIMO/OFDM
Ethernet Interface
10/100/1000 BaseT
VLAN
802.1Q with 802.1p priority
Transmit Power Range
0 to +27 dBm (combined, to regional EIRP limit) (1 dB interval)
Physical characteristics
Weight, kg
2.4
Dimensions (Dia x Depth)
47 cm x 31 cm
Pole Diameter Range
6.4 cm – 7.6 cm
Input Voltage
30 Volts Nominal (14V to 30V range)
Power Consumption
12 Watts
Environmental requirements
Environmental protection
IP55
Wind Survival
180 km/hour
Temperature
-30°C to +60°C